Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECKfeatures:
- Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device (i.e. tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch increment on the measuring device. If the measurement does not meet this criteria, the hook should be inspected further for possible damage.
- Angle Indicators - Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two slings legs.
This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate
under load, see page 93, 95, 103, 106, 111-115. Use in corrosive environment requires shank and nut inspection in accordance with
A.S.M.E. B30.10-1.2.1(b)(2)(c) 2000.
U.S. Patents 5,381,650 & 5,193,480 & 5,103,755 and foreign equivalents.
|
Working Load
Limit
(t)* |
S-322CN
Stock No. |
S-322AN
Stock No. |
Weight
Each
(lbs.) |
|
|
Carbon |
Alloy |
|
3/4 |
1 |
1048600 |
1048804 |
.75 |
1096325 |
|
1 |
1-1/2 |
1048609 |
1048813 |
1.25 |
1096374 |
|
1-1/2 |
2 |
1048618 |
1048822 |
2.25 |
1096421 |
|
2 |
3 |
1048627 |
1048831 |
2.30 |
1096468 |
|
3 |
5 |
1048636 |
1048837 |
4.96 |
1096515 |
|
5 |
7 |
1048645 |
1048854 |
10.29 |
1096562 |
|
7-1/2 |
11 |
1048654 |
1048865 |
16.18 |
1096609 |
|
10 |
15 |
1048663 |
1048877 |
23.25 |
1096657 |
|
15 |
22 |
1048672 |
1048886 |
47.00 |
1096704 |
|
-- |
30 |
-- |
1025688 |
70.50 |
1093716 |
* NOTE: Carbon swivel hooks .75tC-15tC: proof load is 2 times working load limit. Designed with a 5 to 1 design factor.
Alloy swivel hooks 1.5tA-22tA : proof load is 2.5 times the working load limit. Designed with a 4.5 to 1 design factor.
Alloy swivel hooks 30tA: proof load is 2 times working load limit. Designed with a 4 to 1 design factor.
Dimensions for hooks 3/4 ton carbon thru 22 ton alloy are for S-4320 latch kits. Dimensions for hooks 30 ton alloy are for PL latch kit.
Brand: Usage:
